All Products · A-Series

A-Series · Hurricane aluminum

A-60 Impact Fixed Window

Hurricane Impact

A 60 mm impact-rated fixed window: the largest glass and slimmest sightlines in the A-60 line, approved for the High Velocity Hurricane Zone.

Frame
Aluminum · 60 mm
Opening
Fixed
Impact
Large missile
Design pressure
±60 psf Certified
Certified: Florida Product Approval and Miami-Dade testing Project-specific: by size and glass

With no operating sash, the fixed window gives the most glass for the frame. It shares the A-60 profile with the casement and awning, so fixed and operable units match across an elevation.

Technical specifications
System depth60 mm
Frame material6063-T6 aluminum
GlassLaminated impact glass, PVB interlayer; insulating impact glass available
OpeningFixed, non-operable
ImpactLarge missile impact, tested to TAS 201, 202 and 203  Certified
Design pressure±60 psf  Certified
ApprovalsFlorida Product Approval FL40279, design pressure ±60 psf; approved for use inside and outside the High Velocity Hurricane Zone  Certified

Certified values come from the product’s Florida Product Approval and, where noted, its Miami-Dade County Notice of Acceptance. Design pressure is the maximum rated value; the allowable value for a given size is set by the approval drawings.

What is a fixed window?

A fixed window does not open. With no sash movement or operating hardware, it delivers the slimmest sightlines and the largest possible area of glass, and it can be made in almost any shape, including arches, circles, triangles, and trapezoids. Fixed units are used wherever daylight and a view matter but ventilation is handled elsewhere.

See all window & door types ›

Glass & glazing options
Laminated impact glass with a PVB interlayer, single or insulating. Low-E and solar-control coatings, tints and acoustic laminates to suit the project.
Hardware
Corrosion-resistant coastal hardware with multi-point locking. Handle finishes in anodized and powder-coated options; see Finishes.
Sizes & configurations
Single units and mulled combinations. Maximum sizes and the allowable design pressure for each size are set by the Florida Product Approval drawings.
Drawings & details
Product approval drawings, head, jamb and sill sections, and anchoring details are available on request.
Installation
Install per the anchoring and installation drawings of the product approval. See Air Barrier Interface and Installation.
Downloads & resources
Ask us for the current approval package for your project, including the Florida Product Approval documents.