All Products · A-Series

A-Series · Hurricane aluminum

A-60 Impact Casement Window

Hurricane Impact

A 60 mm impact-rated casement window: side-hinged and outward-opening, approved for the High Velocity Hurricane Zone and rated for large and small missile impact.

Frame
Aluminum · 60 mm
Opening
Casement
Impact
Large & small missile
Design pressure
±60 psf Certified
Certified: Florida Product Approval and Miami-Dade testing Project-specific: by size and glass

The casement swings outward, so wind pressure pushes the sash tighter into its seals. Our A-60 casement carries both a Florida Product Approval and a Miami-Dade County Notice of Acceptance, at design pressures to ±60 psf.

Technical specifications
System depth60 mm
Frame material6063-T6 aluminum
GlassLaminated impact glass, PVB interlayer; insulating impact glass available
OpeningCasement, side-hinged outward
ImpactLarge and small missile impact, tested to TAS 201, 202 and 203  Certified
Design pressure±60 psf  Certified
ApprovalsFlorida Product Approval FL41884, design pressure ±60 psf; approved for use inside and outside the High Velocity Hurricane Zone  Certified
Miami-DadeMiami-Dade County, Florida, Notice of Acceptance 23-1222.12, expiration date June 2, 2027  Certified

Certified values come from the product’s Florida Product Approval and, where noted, its Miami-Dade County Notice of Acceptance. Design pressure is the maximum rated value; the allowable value for a given size is set by the approval drawings.

What is a casement window?

A casement window is hinged on one side and swings open like a door, usually outward. Because the entire sash opens, it ventilates fully and catches side breezes, and the harder the wind pushes on it, the tighter it seals against the frame. Casements give an uninterrupted view and a slim sightline.

See all window & door types ›

Glass & glazing options
Laminated impact glass with a PVB interlayer, single or insulating. Low-E and solar-control coatings, tints and acoustic laminates to suit the project.
Hardware
Corrosion-resistant coastal hardware with multi-point locking. Handle finishes in anodized and powder-coated options; see Finishes.
Sizes & configurations
Single units and mulled combinations. Maximum sizes and the allowable design pressure for each size are set by the Florida Product Approval drawings.
Drawings & details
Product approval drawings, head, jamb and sill sections, and anchoring details are available on request.
Installation
Install per the anchoring and installation drawings of the product approval. See Air Barrier Interface and Installation.
Downloads & resources
Ask us for the current approval package for your project, including the Florida Product Approval and Miami-Dade NOA documents.